Revised November 1999 74AC04 • 74ACT04 Hex Inverter General Description Features ■ ICC reduced by 50% on 74AC only The AC/ACT04 contains six inverters. ■ Outputs source/sink 24 mA ■ ACT04 has TTL-compatible inputs Ordering Code: Order Number Package Number Package Description M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Body M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC04SC 74AC04SJ 74AC04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74AC04PC N14A 74ACT04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Body MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74ACT04MTC 74ACT04PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (PC not available in Tape and Reel.) Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names Description An Inputs On Outputs FACT is a trademark of Fairchild Semiconductor Corporation. © 1999 Fairchild Semiconductor Corporation DS009913 www.fairchildsemi.com 74AC04 • 74ACT04 Hex Inverter November 1988 74AC04 • 74ACT04 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) Recommended Operating Conditions −0.5V to +7.0V DC Input Diode Current (IIK) VI = −0.5V −20 mA VI = VCC + 0.5V +20 mA DC Input Voltage (VI) Supply Voltage (VCC) −0.5V to VCC + 0.5V VO = VCC + 0.5V +20 mA 0V to VCC −40°C to +85°C Minimum Input Edge Rate (∆V/∆t) AC Devices VIN from 30% to 70% of VCC ±50 mA VCC @ 3.3V, 4.5V, 5.5V DC VCC or Ground Current 125 mV/ns Minimum Input Edge Rate (∆V/∆t) ±50 mA per Output Pin (ICC or IGND) Storage Temperature (TSTG) 0V to VCC Operating Temperature (TA) −0.5V to VCC + 0.5V DC Output Source or Sink Current (IO) 4.5V to 5.5V Output Voltage (VO) −20 mA DC Output Voltage (VO) 2.0V to 6.0V ACT Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V AC ACT Devices −65°C to +150°C VIN from 0.8V to 2.0V Junction Temperature (TJ) PDIP VCC @ 4.5V, 5.5V 140°C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT circuits outside databook specifications. DC Electrical Characteristics for AC Symbol VIH Parameter Minimum HIGH Level Input Voltage VIL VOH TA = +25°C VCC (V) Typ 3.0 1.5 TA = −40°C to +85°C Guaranteed Limits 2.1 Units 4.5 2.25 3.15 3.15 5.5 2.75 3.85 3.85 Maximum LOW Level 3.0 1.5 0.9 0.9 Input Voltage 4.5 2.25 1.35 1.35 5.5 2.75 1.65 1.65 Minimum HIGH Level 3.0 2.99 2.9 2.9 Output Voltage 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 3.0 2.56 2.46 4.5 3.86 3.76 5.5 4.86 4.76 0.1 0.1 Conditions VOUT = 0.1V 2.1 V or VCC − 0.1V VOUT = 0.1V V or VCC − 0.1V V IOUT = −50 µA VIN = VIL or VIH VOL Maximum LOW Level Output Voltage 3.0 0.002 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 5.5 0.36 0.44 5.5 ±0.1 IOH = −12 mA V IOH = −24 mA IOH = −24 mA (Note 2) V IOUT = 50 µA VIN = VIL or VIH IIN Maximum Input IOL= 12 mA V IOL = 24 mA IOL = 24 mA (Note 2) (Note 4) Leakage Current ±1.0 µA IOLD Minimum Dynamic Output Current 5.5 75 mA VOLD = 1.65V Max IOHD (Note 3) 5.5 −75 mA VOHD = 3.85V Min 20.0 µA ICC Maximum Quiescent (Note 4) Supply Current 5.5 2.0 Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. www.fairchildsemi.com 2 VI = VCC, GND VIN = VCC or GND Symbol VIH VIL VOH Parameter Minimum HIGH Level VCC TA = +25°C (V) Typ 4.5 1.5 TA = −40°C to +85°C Guaranteed Limits 2.0 2.0 Input Voltage 5.5 1.5 2.0 2.0 Maximum LOW Level 4.5 1.5 0.8 0.8 Input Voltage 5.5 1.5 0.8 0.8 Minimum HIGH Level 4.5 4.49 4.4 4.4 Output Voltage 5.5 5.49 5.4 5.4 Units V V V Conditions VOUT = 0.1V or VCC − 0.1V VOUT = 0.1V or VCC − 0.1V IOUT = −50 µA VIN = VIL or VIH VOL 4.5 3.86 3.76 5.5 4.86 4.76 V IOH = −24 mA IOH = −24 mA (Note 5) Maximum LOW Level 4.5 0.001 0.1 0.1 Output Voltage 5.5 0.001 0.1 0.1 4.5 0.36 0.44 5.5 0.36 0.44 5.5 ±0.1 ±1.0 µA VI = VCC, GND VI = VCC − 2.1V V IOUT = 50 µA VIN = VIL or VIH IIN Maximum Input Leakage Current V IOL0 = 24 mA IOL = 24 mA (Note 5) ICCT Maximum 1.5 mA IOLD Minimum Dynamic Output Current 5.5 75 mA VOLD = 1.65V Max IOHD (Note 6) 5.5 −75 mA VOHD = 3.85V Min ICC Maximum Quiescent 40.0 µA ICC/Input Supply Current 5.5 0.6 5.5 4.0 VIN = VCC or GND Note 5: All outputs loaded; thresholds on input associated with output under test. Note 6: Maximum test duration 2.0 ms, one output loaded at a time. 3 www.fairchildsemi.com 74AC04 • 74ACT04 DC Electrical Characteristics for ACT 74AC04 • 74ACT04 AC Electrical Characteristics for AC Symbol tPLH Parameter Propagation Delay Propagation Delay tPHL VCC TA = +25°C (V) CL = 50 p TA = −40°C to +85°C CL = 50 pF (Note 7) Min Typ Max Min Max 3.3 1.5 4.5 9.0 1.0 10.0 5.0 1.5 4.0 7.0 1.0 7.5 3.3 1.5 4.5 8.5 1.0 9.5 5.0 1.5 3.5 6.5 1.0 7.0 Units ns ns Note 7: Voltage Range 3.3 is 3.3V ± 0.3V Voltage Range 5.0 is 5.0V ± 0.5V AC Electrical Characteristics for ACT Symbol Parameter VCC TA = +25°C (V) CL = 50 pF TA = −40°C to +85°C CL = 50 pF (Note 8) Min Typ Max Min Max Units tPLH Propagation Delay 5.0 1.0 6.0 8.5 1.0 9.0 ns tPHL Propagation Delay 5.0 1.0 5.5 8.0 1.0 8.5 ns Note 8: Voltage Range 5.0 is 5.0V ± 0.5V Capacitance Typ Units CIN Symbol Input Capacitance Parameter 4.5 pF VCC = OPEN VCC Power Dissipation Capacitance 30.0 pF VCC = 5.0V www.fairchildsemi.com 4 Conditions 74AC04 • 74ACT04 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Body Package Number M14A 5 www.fairchildsemi.com 74AC04 • 74ACT04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 6 74AC04 • 74ACT04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 7 www.fairchildsemi.com 74AC04 • 74ACT04 Hex Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8