Distributed by: www.Jameco.com ✦ 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Jameco Part Number 36290VIS 1N746A to 1N759A VISHAY Vishay Semiconductors Zener Diodes \ Features • Silicon Planar Power Zener Diodes. • Standard Zener voltage tolerance is ± 5 % for "A" suffix. Mechanical Data 94 9367 Packaging codes/options: TR / 10k per 13 " reel, 30k/box TAP / 10k per Ammo tape (52 mm tape), 30k/box Case: DO-35 Glass Case Weight: approx. 130 mg Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit Ptot 500 1) W Zenner current (see Table "Characteristics") Power dissipation 1) Tamb = 75 °C TL is measured that leads at a distance of 3/8 " from case are kept at ambient temperature Maximum Thermal Resistance Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit Thermal resistance junction to ambient air RθJA Maximum junction temperature Tj 175 °C Storage temperature range TS - 65 to + 175 °C 1) 300 1) °C/W Valid provided that leads at a distance of 3/8 " from case are kept at ambient temperature Document Number 85756 Rev. 2, 04-Apr-03 www.vishay.com 1 1N746A to 1N759A VISHAY Vishay Semiconductors Electrical Characteristics 1N746A to 1N759A Partnumber Nominal Zener Voltage Test Current Maximum Dynamic Impedance Maximum Regulator Current Maximum Reverse Leakage Current (IR @ VR = 1V) VZ @ IZT 3) IZT ZZT @ IZT 1) IZM2) Tamb = 25 °C Tamb = 150 °C V mA Ω mA µA µA 1N746A 3.3 20 28 110 10 30 1N747A 3.6 20 24 100 10 30 1N748A 3.9 20 23 95 10 30 1N749A 4.3 20 22 85 2 30 1N750A 4.7 20 19 75 2 30 1N751A 5.1 20 17 70 1 20 1N752A 5.6 20 11 65 1 20 1N753A 6.2 20 7 60 0.1 20 1N754A 6.8 20 5 55 0.1 20 1N755A 7.5 20 6 50 0.1 20 1N756A 8.2 20 8 45 0.1 20 1N757A 9.1 20 10 40 0.1 20 1N758A 10 20 17 35 0.1 20 1N759A 12 20 30 30 0.1 20 1)The Zener impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of the Zener current (IZT) is superimposed on IZT.Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units. 2) Valid provided that leads at a distance of 3/8 " from case are kept at ambient temperature. 3)Measured with device junction in thermal equilibrium. Package Dimensions in mm Cathode Identification ∅0.55 max. technical drawings according to DIN specifications 94 9366 Standard Glass Case 54 A 2 DIN 41880 JEDEC DO 35 Weight max. 0.3g www.vishay.com 2 ∅1.7 max. 26 min. 3.9 max. 26 min. Document Number 85756 Rev. 2, 04-Apr-03 1N746A to 1N759A VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85756 Rev. 2, 04-Apr-03 www.vishay.com 3 This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.