1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 1N4004 and 1N4007 are Preferred Devices Axial Lead Standard Recovery Rectifiers http://onsemi.com This data sheet provides information on subminiature size, axial lead mounted rectifiers for general–purpose low–power applications. LEAD MOUNTED RECTIFIERS 50–1000 VOLTS DIFFUSED JUNCTION Mechanical Characteristics • Case: Epoxy, Molded • Weight: 0.4 gram (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • • • • Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220°C Max. for 10 Seconds, 1/16″ from case Shipped in plastic bags, 1000 per bag. Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to the part number Available in Fan–Fold Packaging, 3000 per box, by adding a “FF” suffix to the part number Polarity: Cathode Indicated by Polarity Band Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 CASE 59–03 AXIAL LEAD PLASTIC MARKING DIAGRAM AL 1N 400x YYWW AL = Assembly Location 1N400x = Device Number x = 1, 2, 3, 4, 5, 6 or 7 YY = Year WW = Work Week MAXIMUM RATINGS Rating Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit *Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 200 400 600 800 1000 Volts *Non–Repetitive Peak Reverse Voltage (halfwave, single phase, 60 Hz) VRSM 60 120 240 480 720 1000 1200 Volts VR(RMS) 35 70 140 280 420 560 700 Volts *RMS Reverse Voltage *Average Rectified Forward Current (single phase, resistive load, 60 Hz, TA = 75°C) IO 1.0 Amp *Non–Repetitive Peak Surge Current (surge applied at rated load conditions) IFSM 30 (for 1 cycle) Amp Operating and Storage Junction Temperature Range TJ Tstg –65 to +175 °C *Indicates JEDEC Registered Data ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value.  Semiconductor Components Industries, LLC, 2001 March, 2001 – Rev. 7 1 Publication Order Number: 1N4001/D 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 ELECTRICAL CHARACTERISTICS* Rating Maximum Instantaneous Forward Voltage Drop (iF = 1.0 Amp, TJ = 25°C) Maximum Full–Cycle Average Forward Voltage Drop (IO = 1.0 Amp, TL = 75°C, 1 inch leads) Maximum Reverse Current (rated dc voltage) (TJ = 25°C) (TJ = 100°C) Typ Max Unit vF 0.93 1.1 Volts VF(AV) – 0.8 Volts 0.05 1.0 10 50 – 30 µA IR Maximum Full–Cycle Average Reverse Current (IO = 1.0 Amp, TL = 75°C, 1 inch leads) IR(AV) *Indicates JEDEC Registered Data ORDERING & SHIPPING INFORMATION Device Symbol Package Shipping 1N4001 Axial Lead 1000 Units/Bag 1N4001FF Axial Lead 3000 Units/Box 1N4001RL Axial Lead 5000/Tape & Reel 1N4002 Axial Lead 1000 Units/Bag 1N4002FF Axial Lead 3000 Units/Box 1N4002RL Axial Lead 5000/Tape & Reel 1N4003 Axial Lead 1000 Units/Bag 1N4003FF Axial Lead 3000 Units/Box 1N4003RL Axial Lead 5000/Tape & Reel 1N4004 Axial Lead 1000 Units/Bag 1N4004FF Axial Lead 3000 Units/Box 1N4004RL Axial Lead 5000/Tape & Reel 1N4005 Axial Lead 1000 Units/Bag 1N4005FF Axial Lead 3000 Units/Box 1N4005RL Axial Lead 5000/Tape & Reel 1N4006 Axial Lead 1000 Units/Bag 1N4006FF Axial Lead 3000 Units/Box 1N4006RL Axial Lead 5000/Tape & Reel 1N4007 Axial Lead 1000 Units/Bag 1N4007FF Axial Lead 3000 Units/Box 1N4007RL Axial Lead 5000/Tape & Reel http://onsemi.com 2 µA 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 PACKAGE DIMENSIONS AXIAL LEAD CASE 59–03 ISSUE M B NOTES: 1. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY. 2. POLARITY DENOTED BY CATHODE BAND. 3. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. D K DIM A B D F K F A MILLIMETERS MIN MAX 4.07 5.20 2.04 2.71 0.71 0.86 --1.27 27.94 --- F K http://onsemi.com 3 INCHES MIN MAX 0.160 0.205 0.080 0.107 0.028 0.034 --0.050 1.100 --- 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET) Email: ONlit–german@hibbertco.com French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET) Email: ONlit–french@hibbertco.com English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–spanish@hibbertco.com Toll–Free from Mexico: Dial 01–800–288–2872 for Access – then Dial 866–297–9322 ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 1N4001/D