Distributed by:

www.Jameco.com ✦ 1-800-831-4242
The content and copyrights of the attached
material are the property of its owner.

2N3904

MMBT3904

PZT3904
C

C

E

E
C

B

C

TO-92
SOT-23

E

B

B

SOT-223

Mark: 1A

NPN General Purpose Amplifier
This device is designed as a general purpose amplifier and switch.
The useful dynamic range extends to 100 mA as a switch and to
100 MHz as an amplifier.

Absolute Maximum Ratings*
Symbol

TA = 25°C unless otherwise noted

Parameter

Value

Units

VCEO

Collector-Emitter Voltage

40

V

VCBO

Collector-Base Voltage

60

V

VEBO

Emitter-Base Voltage

6.0

V

IC

Collector Current - Continuous

200

mA

TJ, Tstg

Operating and Storage Junction Temperature Range

-55 to +150

°C

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Thermal Characteristics
Symbol
PD

TA = 25°C unless otherwise noted

Characteristic

RθJC

Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Case

RθJA

Thermal Resistance, Junction to Ambient

Max

Units

2N3904
625
5.0
83.3

*MMBT3904
350
2.8

**PZT3904
1,000
8.0

200

357

125

mW
mW/°C
°C/W
°C/W

*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
**Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.

 2001 Fairchild Semiconductor Corporation

2N3904/MMBT3904/PZT3904, Rev A

2N3904 / MMBT3904 / PZT3904

Jameco Part Number 178597

(continued)

Electrical Characteristics
Symbol

TA = 25°C unless otherwise noted

Parameter

Test Conditions

Min

Max

Units

OFF CHARACTERISTICS
V(BR)CEO

IC = 1.0 mA, IB = 0

V(BR)CBO

Collector-Emitter Breakdown
Voltage
Collector-Base Breakdown Voltage

40

V

V(BR)EBO

Emitter-Base Breakdown Voltage

IC = 10 µA, IE = 0

60

V

IE = 10 µA, IC = 0

6.0

V

IBL

Base Cutoff Current

VCE = 30 V, VEB = 3V

50

nA

ICEX

Collector Cutoff Current

VCE = 30 V, VEB = 3V

50

nA

ON CHARACTERISTICS*
hFE

DC Current Gain

VCE(sat)

Collector-Emitter Saturation Voltage

VBE(sat)

Base-Emitter Saturation Voltage

IC = 0.1 mA, VCE = 1.0 V
IC = 1.0 mA, VCE = 1.0 V
IC = 10 mA, VCE = 1.0 V
IC = 50 mA, VCE = 1.0 V
IC = 100 mA, VCE = 1.0 V
IC = 10 mA, IB = 1.0 mA
IC = 50 mA, IB = 5.0 mA
IC = 10 mA, IB = 1.0 mA
IC = 50 mA, IB = 5.0 mA

40
70
100
60
30

0.65

300

0.2
0.3
0.85
0.95

V
V
V
V

SMALL SIGNAL CHARACTERISTICS
fT

Current Gain - Bandwidth Product

Cobo

Output Capacitance

Cibo

Input Capacitance

NF

Noise Figure

IC = 10 mA, VCE = 20 V,
f = 100 MHz
VCB = 5.0 V, IE = 0,
f = 1.0 MHz
VEB = 0.5 V, IC = 0,
f = 1.0 MHz
IC = 100 µA, VCE = 5.0 V,
RS =1.0kΩ,f=10 Hz to 15.7kHz

300

MHz
4.0

pF

8.0

pF

5.0

dB

SWITCHING CHARACTERISTICS
td

Delay Time

VCC = 3.0 V, VBE = 0.5 V,

35

ns

tr

Rise Time

IC = 10 mA, IB1 = 1.0 mA

35

ns

ts

Storage Time

VCC = 3.0 V, IC = 10mA

200

ns

tf

Fall Time

IB1 = IB2 = 1.0 mA

50

ns

*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%

Spice Model
NPN (Is=6.734f Xti=3 Eg=1.11 Vaf=74.03 Bf=416.4 Ne=1.259 Ise=6.734 Ikf=66.78m Xtb=1.5 Br=.7371 Nc=2
Isc=0 Ikr=0 Rc=1 Cjc=3.638p Mjc=.3085 Vjc=.75 Fc=.5 Cje=4.493p Mje=.2593 Vje=.75 Tr=239.5n Tf=301.2p
Itf=.4 Vtf=4 Xtf=2 Rb=10)

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

(continued)

V CE = 5V

400
125 °C

300
25 °C

200
- 40 °C

100
0
0.1

1
10
I C - COLLECTOR CURRENT (mA)

100

Base-Emitter Saturation
Voltage vs Collector Current
1

0.8

β = 10

- 40 °C
25 °C

0.6
125 °C

0.4
0.1
IC

1
10
- COLLECTOR CURRENT (mA)

100

VCESAT- COLLECTOR-EMITTER VOLTAGE (V)

500

VBE(ON)- BASE-EMITTER ON VOLTAGE (V)

Typical Pulsed Current Gain
vs Collector Current

VBESAT- BASE-EMITTER VOLTAGE (V)

h FE - TYP ICAL PULSED CURRE NT GAIN

Typical Characteristics

Collector-Emitter Saturation
Voltage vs Collector Current
0.15

125 °C

0.1
25 °C

0.05
- 40 °C

0.1

1
VCE = 5V
0.8

- 40 °C
25 °C

0.6
125 °C

0.4

0.2
0.1

1
10
I C - COLLECTOR CURRENT (mA)

100

10
f = 1.0 MHz

VCB = 30V

CAPACITANCE (pF)

ICBO- COLLECTOR CURRENT (nA)

100

Capacitance vs
Reverse Bias Voltage

500

10
1
0.1

25

1
10
I C - COLLECTOR CURRENT (mA)

Base-Emitter ON Voltage vs
Collector Current

Collector-Cutoff Current
vs Ambient Temperature
100

β = 10

50
75
100
125
TA - AMBIENT TEMPERATURE ( °C)

150

5
4
3

C ibo

2
C obo

1
0.1

1
10
REVERSE BIAS VOLTAGE (V)

100

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

(continued)

Typical Characteristics

(continued)

Noise Figure vs Source Resistance

Noise Figure vs Frequency

12
I C = 1.0 mA
R S = 200Ω

10

V CE = 5.0V

I C = 1.0 mA

NF - NOISE FIGURE (dB)

NF - NOISE FIGURE (dB)

12

I C = 50 µA
R S = 1.0 kΩ

8

I C = 0.5 mA
R S = 200Ω

6
4
2

I C = 100 µA, R S = 500 Ω

0
0.1

1
10
f - FREQUENCY (kHz)

10
I C = 5.0 mA
I C = 50 µA

8
6

I C = 100 µA

4
2
0
0.1

100

V CE = 40V
I C = 10 mA
10
100
f - FREQUENCY (MHz)

PD - POWER DISSIPATION (W)

- CURRENT GAIN (dB)
fe

h

θ

1

θ - DEGREES

0
20
40
60
80
100
120
140
160
180

h fe

1

1000

SOT-223
0.75

TO-92

0.5

SOT-23
0.25

0

0

Turn-On Time vs Collector Current
I B1 = I B2 =

Ic

VCC = 40V

10

TIME (nS)

15V
t r @ V CC = 3.0V
2.0V

10
1

10
I C - COLLECTOR CURRENT (mA)

125

150

100

I B1 = I B2 =

Ic
10

T J = 25°C
T J = 125°C

10

t d @ VCB = 0V
5

50
75
100
TEMPERATURE (o C)

Rise Time vs Collector Current

40V
100

25

500

t r - RISE TIME (ns)

500

100

Power Dissipation vs
Ambient Temperature

Current Gain and Phase Angle
vs Frequency
50
45
40
35
30
25
20
15
10
5
0

1
10
R S - SOURCE RESISTANCE ( kΩ )

100

5

1

10
I C - COLLECTOR CURRENT (mA)

100

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

(continued)

Typical Characteristics

(continued)

Storage Time vs Collector Current
I B1 = I B2 =

T J = 25°C

Fall Time vs Collector Current
500

Ic

I B1 = I B2 =

10

t f - FALL TIME (ns)

t S - STORAGE TIME (ns)

500

100
T J = 125°C

10
5

T J = 125°C

100
T J = 25°C

1

10
I C - COLLECTOR CURRENT (mA)

5

100

1

10
I C - COLLECTOR CURRENT (mA)

Current Gain
h oe - OUTPUT ADMITTANCE ( µmhos)

V CE = 10 V
f = 1.0 kHz
T A = 25oC

100

10
0.1

1
I C - COLLECTOR CURRENT (mA)

1

1
I C - COLLECTOR CURRENT (mA)

10

V CE = 10 V
f = 1.0 kHz
T A = 25oC

10

1
0.1

1
I C - COLLECTOR CURRENT (mA)

10

Voltage Feedback Ratio

)
_4

V CE = 10 V
f = 1.0 kHz
T A = 25oC

10

0.1
0.1

100

10

Input Impedance
100

100

Output Admittance

h re - VOLTAGE FEEDBACK RATIO (x10

h fe - CURRENT GAIN

VCC = 40V

10

500

h ie - INPUT IMPEDANCE (kΩ )

Ic
10

10
7

V CE = 10 V
f = 1.0 kHz
T A = 25oC

5
4
3
2

1
0.1

1
I C - COLLECTOR CURRENT (mA)

10

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

(continued)

Test Circuits
3.0 V

275 Ω

300 ns
10.6 V
Duty Cycle = 2%

Ω
10 KΩ
0

C1 < 4.0 pF

- 0.5 V
< 1.0 ns

FIGURE 1: Delay and Rise Time Equivalent Test Circuit
3.0 V

10 < t1 < 500 µs

t1
10.9 V

275 Ω

Duty Cycle = 2%
Ω
10 KΩ

0

C1 < 4.0 pF
1N916

- 9.1 V
< 1.0 ns

FIGURE 2: Storage and Fall Time Equivalent Test Circuit

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

TO-92 Tape and Reel Data

TO-92 Packaging
Configuration: Figure 1.0
TAPE and REEL OPTION
FSCINT Label sample

See Fig 2.0 for various
Reeling Styles

FAIRCHILD SEMICONDUCTOR CORPORATION
LOT:

CBVK741B019

PN2222N

NSID:

D/C1:

HTB:B
QTY: 10000

SPEC:

D9842

SPEC REV:

FSCINT
Label

B2

QA REV:

5 Reels per
Intermediate Box

(FSCINT)

Customized
Label

F63TNR Label sample
LOT: CBVK741B019
FSID: PN222N
D/C1: D9842
D/C2:

F63TNR
Label

QTY: 2000
SPEC:

QTY1:
QTY2:

SPEC REV:
CPN:
N/F: F

Customized
Label

(F63TNR)3

375mm x 267mm x 375mm
Intermediate Box
TO-92 TNR/AMMO PACKING INFROMATION
Packing

Style

Quantity

EOL code

Reel

A

2,000

D26Z

E

2,000

D27Z

Ammo

M

2,000

D74Z

P

2,000

D75Z

AMMO PACK OPTION
See Fig 3.0 for 2 Ammo
Pack Options

FSCINT
Label

Unit weight
= 0.22 gm
Reel weight with components
= 1.04 kg
Ammo weight with components = 1.02 kg
Max quantity per intermediate box = 10,000 units

327mm x 158mm x 135mm
Immediate Box
Customized
Label

(TO-92) BULK PACKING INFORMATION
EOL
CODE

DESCRIPTION

QUANTITY

TO-18 OPTION STD

NO LEAD CLIP

2.0 K / BOX

J05Z

TO-5 OPTION STD

NO LEAD CLIP

1.5 K / BOX

NO LEADCLIP

2.0 K / BOX

NO LEADCLIP

2.0 K / BOX

TO-92 STANDARD
STRAIGHT FOR: PKG 92,
94 (NON PROELECTRON
SERIES), 96

L34Z

TO-92 STANDARD
STRAIGHT FOR: PKG 94
(PROELECTRON SERIES
BCXXX, BFXXX, BSRXXX),
97, 98

Customized
Label

F63TNR
Label
333mm x 231mm x 183mm
Intermediate Box

BULK OPTION

LEADCLIP
DIMENSION

J18Z

NO EOL
CODE

5 Ammo boxes per
Intermediate Box

See Bulk Packing
Information table
Anti-static
Bubble Sheets

FSCINT Label

2000 units per
EO70 box for
std option

114mm x 102mm x 51mm
Immediate Box

5 EO70 boxes per
intermediate Box
530mm x 130mm x 83mm
Intermediate box

Customized
Label

FSCINT Label
10,000 units maximum
per intermediate box
for std option

©2001 Fairchild Semiconductor Corporation

March 2001, Rev. B1

TO-92 Tape and Reel Data, continued

TO-92 Reeling Style
Configuration: Figure 2.0
Machine Option “A” (H)

Machine Option “E” (J)

Style “A”, D26Z, D70Z (s/h)

Style “E”, D27Z, D71Z (s/h)

TO-92 Radial Ammo Packaging
Configuration: Figure 3.0
FIRST WIRE OFF IS COLLECTOR
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP

ORDER STYLE
D74Z (M)

FIRST WIRE OFF IS EMITTER (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM

FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOTTOM

ORDER STYLE
D75Z (P)

FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON TOP

September 1999, Rev. B

TO-92 Tape and Reel Data, continued
TO-92 Tape and Reel Taping
Dimension Configuration: Figure 4.0

Hd
P

Pd

b
Ha

W1

d
L
H1 HO

L1

S
WO

t

W2
W

t1
P1 F1
DO

P2

PO

User Direction of Feed

TO-92 Reel
Configuration: Figure 5.0

ITEM DESCRIPTION

SYMBOL

DIMENSION

Base of Package to Lead Bend

b

0.098 (max)

Component Height

Ha

0.928 (+/- 0.025)

Lead Clinch Height

HO

0.630 (+/- 0.020)

Component Base Height

H1

0.748 (+/- 0.020)

Component Alignment ( side/side )

Pd

0.040 (max)

Component Alignment ( front/back )

Hd

0.031 (max)

Component Pitch

P

0.500 (+/- 0.020)

Feed Hole Pitch

PO

0.500 (+/- 0.008)

Hole Center to First Lead

P1

0.150 (+0.009, -0.010)

Hole Center to Component Center

P2

0.247 (+/- 0.007)

Lead Spread

F1/F2

0.104 (+/- 0 .010)

Lead Thickness

d

0.018 (+0.002, -0.003)

Cut Lead Length

L

0.429 (max)

Taped Lead Length

L1

0.209 (+0.051, -0.052)

Taped Lead Thickness

t

0.032 (+/- 0.006)

Carrier Tape Thickness

t1

0.021 (+/- 0.006)

Carrier Tape Width

W

0.708 (+0.020, -0.019)

Hold - down Tape Width

WO

0.236 (+/- 0.012)

Hold - down Tape position

W1

0.035 (max)

Feed Hole Position

W2

0.360 (+/- 0.025)

Sprocket Hole Diameter

DO

0.157 (+0.008, -0.007)

Lead Spring Out

S

0.004 (max)

Note : All dimensions are in inches.
ELECT ROSTATIC
SEN SITIVE D EVICES

D4

D1

D2

F63TNR Label

ITEM DESCRIPTION

SYSMBOL

MINIMUM

MAXIMUM

Reel Diameter

D1

13.975

14.025

Arbor Hole Diameter (Standard)

D2

1.160

1.200

D2

0.650

0.700

Customized Label

(Small Hole)

W1

Core Diameter

D3

3.100

3.300

Hub Recess Inner Diameter

D4

2.700

3.100

Hub Recess Depth

W1

0.370

0.570

Flange to Flange Inner Width

W2

1.630

Hub to Hub Center Width

W3

1.690
2.090

W3

W2

Note: All dimensions are inches
D3

July 1999, Rev. A

TO-92 Package Dimensions

TO-92 (FS PKG Code 92, 94, 96)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]

Part Weight per unit (gram): 0.1977

©2000 Fairchild Semiconductor International

January 2000, Rev. B

SOT-23 Tape and Reel Data
SOT-23 Packaging
Configuration: Figure 1.0
Customized Label

Packaging Description:
SOT-23 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 units per 7" or 177cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13"
or 330cm diameter reel. This and some other options are
described in the Packaging Information table.

Antistatic Cover Tape

Human Readable
Label

These full reels are individually labeled and placed inside
a standard intermediate made of recyclable corrugated
brown paper with a Fairchil d logo printing. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed inside a labeled shipping box which
comes in different sizes depending on the number of parts
shipped.

Embossed
Carrier Tape

3P

3P

3P

3P

SOT-23 Packaging Information
Packaging Option
Packaging type
Qty per Reel/Tube/Bag

Standard
(no flow code)
TNR
3,000

D87Z

7" Dia

13"

187x107x183

343x343x64

Max qty per Box

24,000

30,000

Weight per unit (gm)

0.0082

0.0082

Weight per Reel (kg)

0.1175

0.4006

Reel Size
Box Dimension (mm)

SOT-23 Unit Orientation

TNR
10,000

343mm x 342mm x 64mm
Intermediate box for L87Z Option

Human Readable Label

Note/Comments

Human Readable Label sample

H uman readable
Label

187mm x 107mm x 183mm
Intermediate Box for Standard Option

SOT-23 Tape Leader and Trailer
Configuration: Figure 2.0

Carrier Tape
Cover Tape

Components
Trailer Tape
300mm minimum or
75 empt y poc kets

©2000 Fairchild Semiconductor International

Leader Tape
500mm minimum or
125 empty pockets

September 1999, Rev. C

SOT-23 Tape and Reel Data, continued
SOT-23 Embossed Carrier Tape
Configuration: Figure 3.0
P0

P2

D1

D0

T
E1

W

F
E2
Wc

B0

Tc

A0

P1

K0

User Direction of Feed

Dimensions are in millimeter
Pkg type

A0

B0

SOT-23
(8mm)

3.15
+/-0.10

2.77
+/-0.10

W
8.0
+/-0.3

D0

D1

E1

E2

1.55
+/-0.05

1.125
+/-0.125

1.75
+/-0.10

F

6.25
min

3.50
+/-0.05

P1

P0

4.0
+/-0.1

4.0
+/-0.1

K0

T

1.30
+/-0.10

0.228
+/-0.013

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).

Wc

0.06
+/-0.02

0.5mm
maximum

20 deg maximum
Typical
component
cavity
center line

B0

5.2
+/-0.3

Tc

0.5mm
maximum

20 deg maximum component rotation
Typical
component
center line

Sketch A (Side or Front Sectional View)
A0

Component Rotation

Sketch C (Top View)

Component lateral movement

Sketch B (Top View)

SOT-23 Reel Configuration: Figure 4.0

Component Rotation

W1 Measured at Hub

Dim A
Max

Dim A
max

See detail AA

Dim N

7" Diameter Option
B Min
Dim C
See detail AA
W3

13" Diameter Option

Dim D
min

W2 max Measured at Hub
DETAIL AA

Dimensions are in inches and millimeters
Tape Size

Reel
Option

Dim A

Dim B

Dim C

Dim D

Dim N

Dim W1

Dim W2

Dim W3 (LSL-USL)

8mm

7" Dia

7.00
177.8

0.059
1.5

512 +0.020/-0.008
13 +0.5/-0.2

0.795
20.2

2.165
55

0.331 +0.059/-0.000
8.4 +1.5/0

0.567
14.4

0.311 – 0.429
7.9 – 10.9

8mm

13" Dia

13.00
330

0.059
1.5

512 +0.020/-0.008
13 +0.5/-0.2

0.795
20.2

4.00
100

0.331 +0.059/-0.000
8.4 +1.5/0

0.567
14.4

0.311 – 0.429
7.9 – 10.9

September 1999, Rev. C

SOT-23 Package Dimensions

SOT-23 (FS PKG Code 49)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]

Part Weight per unit (gram): 0.0082

©2000 Fairchild Semiconductor International

September 1998, Rev. A1

SOT-223 Tape and Reel Data
SOT-223 Packaging
Configuration: Figure 1.0
Customized Label
Packaging Description:

F63TNR Label
Antistatic Cover Tape

SOT-223 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
2,500 units per 13" or 330cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or
177cm diameter reel. This and some other options are
further described in the Packaging Information table.
These full reels are individually barcode labeled and
placed inside a standard intermediate box (illustrated in
figure 1.0) made of recyclable corrugated brown paper.
One box contains two reels maximum. And these boxes
are placed inside a barcode labeled shipping box which
comes in different sizes depending on the number of parts
shipped.

Static Dissipative
Embossed Carrier Tape

F852
014

F852
014

F852
014

F852
014

SOT-223 Packaging Information
Packaging Option
Packaging type
Qty per Reel/Tube/Bag
Reel Size
Box Dimension (mm)

Standard
(no flow code)
TNR
2,500

D84Z

SOT-223 Unit Orientation

TNR
500

13" Dia

7" Dia

343x64x343

184x187x47

Max qty per Box

5,000

1,000

Weight per unit (gm)

0.1246

0.1246

Weight per Reel (kg)

0.7250

0.1532

343mm x 342mm x 64mm
Intermediate box for Standard

F63TNR Label

Note/Comments

F63TNR Label

F63TNR Label sample

184mm x 184mm x 47mm
Pizza Box for D84Z Option

SOT-223 Tape Leader and Trailer
Configuration: Figure 2.0

LOT: CBVK741B019

QTY: 3000

FSID: PN2222A

SPEC:

D/C1: D9842
D/C2:

QTY1:
QTY2:

SPEC REV:
CPN:
N/F: F

(F63TNR)3

Carrier Tape
Cover Tape

Components
Trailer Tape
300mm minimum or
38 empty pockets

©2000 Fairchild Semiconductor International

Leader Tape
500mm minimum or
62 empty pockets

September 1999, Rev. B

SOT-223 Tape and Reel Data, continued
SOT-223 Embossed Carrier Tape
Configuration: Figure 3.0

P0

D0

T
E1

F
K0

Wc

W

E2

B0

Tc
A0

D1

P1

User Direction of Feed

Dimensions are in millimeter
Pkg type
SOT-223
(12mm)

A0
6.83
+/-0.10

B0
7.42
+/-0.10

W
12.0
+/-0.3

D0

D1

1.55
+/-0.05

1.50
+/-0.10

E1

E2

1.75
+/-0.10

F

10.25
min

P1

5.50
+/-0.05

P0

8.0
+/-0.1

4.0
+/-0.1

K0
1.88
+/-0.10

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).

T

Wc

0.292
+/0.0130

9.5
+/-0.025

0.06
+/-0.02

0.5mm
maximum

20 deg maximum
Typical
component
cavity
center line

B0

Tc

0.5mm
maximum

20 deg maximum component rotation
Typical
component
center line

Sketch A (Side or Front Sectional View)
A0

Component Rotation

Sketch C (Top View)

Component lateral movement

Sketch B (Top View)

SOT-223 Reel Configuration: Figure 4.0

Component Rotation

W1 Measured at Hub

Dim A
Max

Dim A
max

See detail AA

Dim N

7" Diameter Option
B Min
Dim C
See detail AA
W3

13" Diameter Option

Dim D
min

W2 max Measured at Hub
DETAIL AA

Dimensions are in inches and millimeters
Tape Size

Reel
Option

Dim A

Dim B
0.059
1.5

512 +0.020/-0.008
13 +0.5/-0.2

0.795
20.2

5.906
150

0.488 +0.078/-0.000
12.4 +2/0

0.724
18.4

0.469 – 0.606
11.9 – 15.4

0.059
1.5

512 +0.020/-0.008
13 +0.5/-0.2

0.795
20.2

7.00
178

0.488 +0.078/-0.000
12.4 +2/0

0.724
18.4

0.469 – 0.606
11.9 – 15.4

12mm

7" Dia

7.00
177.8

12mm

13" Dia

13.00
330

Dim C

Dim D

Dim N

Dim W1

Dim W2

Dim W3 (LSL-USL)

July 1999, Rev. B

SOT-223 Package Dimensions

SOT-223 (FS PKG Code 47)

1:1
Scale 1:1 on letter size paper

Part Weight per unit (gram): 0.1246

©2000 Fairchild Semiconductor International

September 1999, Rev. C

TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.

ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
FACT Quiet Series™
FAST 

FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™

PowerTrench 
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER 
SMART START™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8

SyncFET™
TinyLogic™
UHC™
VCX™

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification

Product Status

Definition

Advance Information

Formative or
In Design

This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.

Preliminary

First Production

This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.

No Identification Needed

Full Production

This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.

Obsolete

Not In Production

This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.

Rev. G