H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 1/26 Document No. DC110-000 Revision 1.0 TO : Date : Aug, 1, 2008 HannStar Product Specification (Preliminary) 10” Color TFT-LCD Module Model: HSD100IFW1 -C** Note: 1. The information contained herein is tentative and may be changed without prior notices 2.Please contact HannStar Display Corp. before designing your product based on this module specification. 3.The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein. 4.The mark “ ** ” of Model means sub-model code. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 2/26 Document No. DC110-000 Revision 1.0 Record of Revisions Rev. Date Sub-Model 1.0 Aug., 1, 2008 - Description of change Preliminary Product Specification was first released. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 3/26 Document No. DC110-000 Revision 1.0 Contents 1.0 General description ………………………………… 2.0 Absolute maximum ratings……………………………. p.5 3.0 Optical characteristics.………………………………. p.6 4.0 Block diagram p.10 5.0 Interface pin connection …………………………… p.11 6.0 Electrical characteristics …………………………… p.13 7.0 Reliability test items ………………………………… p.21 8.0 Outline dimension …………………………………… p.22 9.0 Lot mark ……………………………………………... p.23 10.0 Package specification ……………………………… p.24 11.0 General precaution …………………………………… p.25 ……………………………………… p.4 The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 4/26 Document No. DC110-000 Revision 1.0 1.0 GENERAL DESCRIPTION 1.1 Introduction HannStar Display model HSD100IFW1-C is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 10 (17:10) inch diagonally measured active display area with WSVGA (1024 horizontal by 600 vertical pixel) resolution. 1.2 Features Ŷ 10 (17:10 diagonal) inch configuration Ŷ 6 bits driver with 1channel TTL interface Ŷ RoHS and Halogen-Free Compliance 1.3 Applications „Portable DVD „Digital Photo frame „Display terminal for AV application 1.4 General information Item Specification Unit Outline Dimension 235 x 145.8 x 5.5 (Typ.) mm Display area 220.416(H) x 129.15(V) mm Number of Pixel 1024 RGB (H) x 600(V) pixels Pixel pitch 0.21525(H) x 0.21525(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally white Surface treatment Antiglare, Hard-Coating (3H) with EWV film Weight (235) (Typ.) Back-light Single LED (Side-Light type) Power Consumption g Logic System (0.6) (Max.) W B/L System (2.4) (Max.) W 1.5 Mechanical Information Item Module Size Weight Min. Typ. Max. Unit Horizontal (H) 234.5 235 235.5 mm Vertical (V) 145.3 145.8 146.3 mm Depth (D) Ё 5.5 (235) 5.8 mm Ё g Ё The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 5/26 Document No. DC110-000 Revision 1.0 2.0 ABSOLUTE MAXIMUM RATINGS 2.1 Electrical Absolute Rating 2.1.1 TFT LCD Module Item Symbol Min. Max. Unit Digital Supply voltage VCC -0.5 5 V Analog Supply voltage AVDD -0.5 13.5 V Supply voltage V1~V7 0.4AVDD AVDD+0.3 Note V V8~V14 -0.3 0.6AVDD V - -0.5 VCC+0.5 V Symbol Typ. Max. Unit Note LED current IL 200 Ё mA (1) (2)(3) LED voltage VL 10.5 Ё V (1) (2)(3) Digital input voltage 2.1.2 Note Back-Light Unit Item (1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normal operating conditions. (2) Ta =25±2к (3) Test Condition: LED current 200 mA. The LED lifetime could be decreased if operating IL is larger than 200mA. 2.2 Environment Absolute Rating Item Symbol Min. Max. Unit Operating Temperature Topa 0 50 к Storage Temperature Tstg -20 60 к Note The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 6/26 Document No. DC110-000 Revision 1.0 3.0 OPTICAL CHARACTERISTICS 3.1 Optical specification Item Symbol Condition Min. Typ. Max. CR 400 500 Ё Rising TR Ё 5 7 Falling White luminance (Center) TF Ә=0 Ё Normal viewing angle 20 28 200 250 Ё 0.260 0.310 0.360 Wy 0.280 0.330 0.380 ӘL 60 70 Ё ӘR 60 70 Ё 40 50 Ё 50 60 Ё 70 Ё Ё Contrast Response time Color chromaticity (CIE1931) White Hor. Viewing angle Ver. Brightness uniformity YL Wx ӘU CR>10 ӘD BUNI Ә=0 Optima View Direction 3.2 6 Oϗclock Unit Note (1)(2) msec (1)(3) cd/m2 (1)(4) (IL=200mA) (1)(4) % (5) (6) Measuring Condition Ŷ Measuring surroundingΚdark room Ŷ LED current ILΚ200mA Ŷ Ambient temperatureΚ25±2oC Ŷ 15min. warm-up time. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 7/26 Document No. DC110-000 Revision 1.0 3.3 Measuring Equipment Ŷ FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics. Ŷ Measuring spot sizeΚ20 ~ 21 mm Note (1) Definition of Viewing Angle: ӘU 12’ o’clock ӥ=90o ӘL ӘR ӥ=180o ӥ=0o ӘD 6’ o’clock ӥ=270o Note (2) Definition of Contrast Ratio (CR) : measured at the center point of panel Luminance with all pixels white CR = Luminance with all pixels black The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 8/26 Document No. DC110-000 Revision 1.0 Note (3) Definition of Response Time : Sum of TR and TF white(TFT OFF) black (TFT ON) TR white(TFT OFF) TF 100% 90% Optical response 10% 0% time Note (4) Definition of optical measurement setup The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 9/26 Document No. DC110-000 Revision 1.0 Note (5) Definition of brightness uniformity 16.67% 50.00% 83.33% Y2 Y3 Y4 Y9 Y1 Y5 Y8 Y7 Y6 16.67% 50.00% 83.33% (Min Luminance of 9 points) Luminance uniformity = (Max Luminance of 9 points) ͪ100% Note (6)ΚRubbing Direction (The different Rubbing Direction will cause the different optima view direction. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 10/26 Document No. DC110-000 Revision 1.0 1024(RGB)x600 G/D 4.0 BLOCK DIAGRAM 4.1 TFT LCD Module: S/D S/D S/D CN2 X-PCB CN1 LED CN3 4.2 Pixel Format 1,1 1,2 1,3 1,1024 1,4 LCD Display Area 2,1 1 Pixel R 600,1 G 600 Lines B R R 600, 1024 1024 pixel (3072 Dots) The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 11/26 Document No. DC110-000 Revision 1.0 5.0 INTERFACE PIN CONNECTION 5.1 TFT LCD ModuleΚ CN1 (Input signal): 30pin, 0.5mm pitch, 196033-30041-3 (P-TWO or equivalent) Pin No. Signal 1 2 3 4 5 6 POL STVD OE123R G-CLKR STVU GND 7 EDGSEL 8 9 10 11 12 13 VCC V9 VGL V2 VGH V6 14 UDC 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 VCOM AGND AVDD V14 V11 V8 V5 V3 GND R5 R4 R3 R2 R1 R0 GND Description Polarity Setting Vertical Line start pulse I/O signal Vertical Line output Enable signal Vertical Line Clock Vertical Line start pulse I/O signal Digital Power Ground Define clock edge select input, default EDGSEL=L. EDGSEL=L Latch data by rising edge of clock EDGSEL=H Latch data by rising and falling edges of clock Digital Voltage Input Gamma Voltage Input Gate OFF Voltage Gamma Voltage Input Gate ON Voltage Gamma Voltage Input Shift up/down control signal UDC = "H", up shift: STVD (Input) ÆG1 ~ G600ÆSTVU (Output) UDC= "L", down shift: STVU (Input) ÆG600~G1ÆSTVD (Output) Common Voltage Analog Power Ground Analog Voltage Input Gamma Voltage Input Gamma Voltage Input Gamma Voltage Input Gamma Voltage Input Gamma Voltage Input Digital Power Ground Red Data Bus Input (MSB) Red Data Bus Input Red Data Bus Input Red Data Bus Input Red Data Bus Input Red Data Bus Input (LSB) Digital Power Ground The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 12/26 Document No. DC110-000 Revision 1.0 CN2 (Input signal): 30pin, 0.5mm pitch,196033-30041-3 (P-TWO or equivalent) Pin No. Signal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 GND G5 G4 G3 G2 G1 G0 DIO2_COF3 REV GND CLK VCC DIO1_COF1 LD B5 B4 B3 B2 B1 B0 21 LRC 22 23 24 25 26 27 28 29 30 V1 V4 V7 V10 V12 V13 AVDD AGND VCOM Description Digital Power Ground Green Data Bus Input (MSB) Green Data Bus Input Green Data Bus Input Green Data Bus Input Green Data Bus Input Green Data Bus Input (LSB) Horizontal Line start pulse I/O signal (STHR) Data Invert signal Digital Power Ground Pixel clock Digital Voltage Input Horizontal Line start pulse I/O signal (STHL) Polarity latch and re-flash new data to output Blue Data Bus Input (MSB) Blue Data Bus Input Blue Data Bus Input Blue Data Bus Input Blue Data Bus Input Blue Data Bus Input (LSB) Select left or right shift, normally pulled high. SHL=“1”: DIO1Æ OUT1,2,3ÆOUT4,5,6Æ OUT1198,1199,1200 = DIO2 SHL=“0”: DIO1= OUT1,2,3 Å OUT4,5,6Å OUT1198,1199,1200ÅDIO2 Gamma Voltage Input Gamma Voltage Input Gamma Voltage Input Gamma Voltage Input Gamma Voltage Input Gamma Voltage Input Analog Voltage Input Analog Power Ground Common Voltage 5.2 Back-Light Unit CN3 LED Power Source (BHSR-02VS-1) or equivalent Mating Connector: (SBHT-002T-P0.5) or equivalent Terminal no. Symbol Function 1 VL LED power supply (high voltage) 2 GL LED power supply (low voltage) The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 13/26 Document No. DC110-000 Revision 1.0 6.0 ELECTRICAL CHARACTERISTICS 6.1 TFT LCD Module Item Symbol Min. Typ. Max. Unit Note Vcc 3.0 3.3 3.6 V Note (2), Note (3) VGH 14.55 15 15.45 V Note (2), Note (3) VGL -7.35 -7 -6.65 V Note (2), Note (3) AVDD 9.22 9.48 9.75 V Note (2), Note (3) VCOM VCOMin - 3.41 - V Input signal voltage ViH 0.7 Vcc - Vcc V ViL 0 - 0.3 Vcc V ICC - 5 - mA Vcc = 3.3V IADD - 60 - mA AVDD= 9.5 V (Black) IGH - 0.3 - mA VGH= 15 V IGL - 0.6 - mA VGL= -7 V Vx AVDD/2 - AVDD-0.1 V Vx 0.1 - AVDD/2 V Supply Voltage Current of power supply Input level of V1~V5 Input level of V6~V10 Note (1) Note (1): HSYNC, VSYNC, DE, Digital Data Note (2): Be sure to apply the power voltage as the power sequence spec. Note (3): DGND=AGND=0V The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 14/26 Document No. DC110-000 Revision 1.0 6.2 Back-Light Unit The back-light system is an edge-lighting type with 30 LED. The characteristics of the LED are shown in the following tables. Item Symbol Min. Typ. Max. Unit Note (2) LED current IL Ё 200 Ё mA LED voltage VL Ё 10.5 Ё V Operating LED life time Hr 20000 Ё Ё Hour (1)(2) LCD MODULE Black White (Ground) 1 2 Power Supply A Note (1) LED life time (Hr) can be defined as the time in which it continues to operate under the condition: Ta=25±3 oC, typical IL value indicated in the above table until the brightness becomes less than 50%. Note (2) The “LED life time” is defined as the module brightness decrease to 50% original brightness at Ta=25к and IL=200mA. The LED lifetime could be decreased if operating IL is larger than 200mA. The constant current driving method is suggested. LED Light Bar Circuit The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 15/26 Document No. DC110-000 Revision 1.0 Note (3) Suggested Schematic of LED Back-Light Driver Suggested Schematic of LED Back-Light Driver The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 16/26 Document No. DC110-000 Revision 1.0 6.3 AC Characteristics Source Driver Timing Item Symbol Min. Typ. Max. Unit Note CLK frequency Fclk - 55 70 MHz - CLK pulse width Tcw 6 - - ns - Data set-up time Tsu 4 - - ns - Data hold time Thd 2 - - ns - Propagation delay of DIO2/1 Tphl 6 10 15 ns CL=25pF ( Output ) Time that the last data to LD Tld 1 - - Tcph - Pulse width of LD Twld 2 - - Tcph - Time that LD to DIO1/2 Tlds 5 - - Tcph - POL set-up time Tpsu 6 - - ns POL to LD POL hold time Tphd 6 ns POL to LD Gate Driver Timing Item CPV period Symbol Min. Typ. Max. Unit Note Tcpv 5 - - us - CPV pulse width Tcpvh, Tcpvl 2.5 - - us 50% duty cycle OE pulse width Twoe 1 - - us - Data setup time Tsu 0.7 - - us - Data hold time Thd 0.7 - - us - The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 17/26 Document No. DC110-000 Revision 1.0 6.4 Timing Diagram of Interface Signal Source Driver Timing Tcph CLK 30% Tsu DIO1/2 Thd Tcw 70% 70% 70% 70% 70% 70% 70% 30% Tcw 70% (input) Tsu Thd 70% Data,REV First data Second data Last data Tphl 70% DIO1/2 Tphl 30% (output) 70% CLK Tld LD 70% 70% Twld Tlds DIO1/2 70% (input) 70% LD Tpsu Tphd POL 70% 70% The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 18/26 Document No. DC110-000 Revision 1.0 Gate Driver Timing Tcph Tcpl CPV Tsu Tcpv 50% Thd 50% STVU Twoe 50% OE The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 19/26 Document No. DC110-000 Revision 1.0 6.5 Power On / Off Sequence Power Off Power On Power Supply 0.9VDD 0.9VDD 0.1VDD 0V 0.1VDD 0.1VDD TP1 Signal TP2 TP3 0.6V 0.6V TP4 0V Backlight (Recommended) Item TP1 TP2 TP3 TP4 TP5 TP6 TP5 TP6 50% 50% Min. 0.5 0 0 500 200 200 Typ. ------- Level define Max. 10 50 50 ---- Unit msec msec msec msec msec msec Remark 90% 10% T Power On Sequence: VCC-> AVDD -> VGL -> VGH -> Data -> B/L Power Off Sequence: B/L-> Data -> VGH -> VGL -> AVDD -> VCC Notes: Data include R0~R7, G0~G7, B0~B7, HSD, VSD, DCLK, SHLR, UPDN, DE MODE, RSTB, STBYB, SHLR, UPDN, DITH The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 20/26 Document No. DC110-000 Revision 1.0 V7 V7 V6 V6 V5 V5 V4 V4 V3 V3 V2 V2 V1 V1 6.6 Gamma circuit AVDD V7 V14 V14 V13 V13 V12 V12 V11 V11 90.9(0603,1%) 30.1(0603,1%) 21.5(0603,1%) 42.2(0603,1%) 53.6(0603,1%) V10 V9 V9 V8 V8 12.4(0603,1%) 34.8(0603,1%) V10 AVDD V7 61.9(0603,1%) 21(0603,1%) 66.5(0603,1%) 38.3(0603,1%) 40.2(0603,1%) 95.3(0603,1%) 32.4(0603,1%) 13.7(0603,1%) *Suggested Gamma Circuit. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 21/26 Document No. DC110-000 Revision 1.0 7.0 Reliability test items No. Item Conditions 1 High Temperature Storage Ta=+60 C, 240hrs 2 Low Temperature Storage Ta=-20oC, 240hrs 3 High Temperature Operation Ta=+50oC, 500hrs 4 Low Temperature Operation Ta=0oC, 500hrs 5 High Temperature and High Humidity (operation) Ta=+50oC, 80%RH, 500hrs 6 Thermal Cycling Test (non operation) -20oC(30min) ĺ +60oC(30min), 100 cycles 7 Electrostatic Discharge 8 Vibration 9 Shock Remark o ²200V,200pF(0Ÿ) 1 time/connector 1.Random: 1.04G, 10~500Hz, XYZ, 30min/each direction 2.Sine: 1.5G, 5~500Hz, XYZ 30min/each direction Half-Sine, 220G, 2ms, ±XYZ, 1time 10 Vibration (with carton) Random: 1.04G, 10~500Hz, XYZ, 45min/each direction 11 Drop (with carton) HeightΚ60 cm JIS Z0202 1 corner, 3 edges, 6 surfaces Note: There is no display function NG issue occurred, all the cosmetic specification is judged before the reliability stress. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 22/26 Document No. DC110-000 Revision 1.0 8.0 OUTLINE DIMENSION 8.1 Outline Dimension Unit : mm The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 23/26 Document No. DC110-000 Revision 1.0 9.0 LOT MARK 9.1 Lot Mark ˞ ˟ ˠ ˡ ˢ ˣ ˤ ˥ ˦ 10 11 12 13 14 15 Code 1,2,3,4,5,6: HannStar internal flow control code. Code 7: production location. Code 8: production year. Code 9: production month. Code 10,11,12,13,14,15: serial number. Note (1) Production Year Year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 Mark 9 0 1 2 3 4 5 6 7 8 Note (2) Production Month Month Jan. Mark 1 Feb. Mar. 2 3 Apr. 4 May. Jun. 5 6 Jul. 7 Aug. Sep. 8 9 Oct A Nov. Dec. B C 9.2 Location of Lot Mark (1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 24/26 Document No. DC110-000 Revision 1.0 10.0 PACKAGE SPECIFICATION 10.1 Packing form (1) Package quantity in one carton: 30 pieces. (2) Carton size: 460̈́5 mmͪ361̈́5 mmͪ321̈́5 mm. 10.2 Packing assembly drawings The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 25/26 Document No. DC110-000 Revision 1.0 11.0 GENERAL PRECAUTION 11.1 Use Restriction This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 11.2 Disassembling or Modification Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module. 11.3 Breakage of LCD Panel 11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin. 11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately. 11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. Handle carefully with chips of glass that may cause injury, when the glass is broken. 11.4 Electric Shock 11.4.1. Disconnect power supply before handling LCD module. 11.4.2. Do not pull or fold the LED cable. 11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connector or cables in order to prevent electric shock. 11.5 Absolute Maximum Ratings and Power Protection Circuit 11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature, etc., otherwise LCD module may be damaged. 11.5.2. Please do not leave LCD module in the environment of high humidity and high temperature for a long time. 11.5.3. It’s recommended to employ protection circuit for power supply. 11.6 Operation 11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead. 11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly. 11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation. H a n n Sta r D i s p l a y C o r p . Document Title HSD100IFW1-C Preliminary Specification Page No. 26/26 Document No. DC110-000 Revision 1.0 11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading. 11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 Mechanism Please mount LCD module by using mounting holes arranged in four corners tightly. 11.8 Static Electricity 11.8.1 Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence. 11.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods. 11.9 Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed. 11.10 Disposal When disposing LCD module, obey the local environmental regulations. The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.